BRAKE FLUID TESTING

• Target group: technicians (2-8 participants)
• Duration: 15-30 minutes
• Session plan: This session explains the importance of the boiling point of brake fluid and how it can be used to determine the condition of the fluid.

BRAKE NOISE

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: Upon completion of this session, participants will have an understanding of what causes brake noise and how they can eliminate it.

COMMON BRAKING ISSUES

• Target group: mechanics (2-8 participants)
• Duration: 30-60 minutes
• Session plan: This training module covers the main issues that can affect the performance of braking systems, their causes and how to correctly rectify them. The content also includes comprehensive installation advice for a number of components.

ELECTRIC PARKING BRAKE (EPB)

• Target group: mechanics (2-8 participants)
• Duration: 15-30 minutes
• Session plan: This course provides an introduction to the Electronic Park Brake (EPB). It provides an overview of the different types of system and how each operates, plus advice on how to work safely on the rear callipers.  

BRAKE PAD FITTING TIPS & TRICKS

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This training module covers all there is to know about installing brake pads, including the difference in procedure between directional and normal items.

BRAKE PAD WEAR SENSORS

• Target group: mechanics (2-8 participants)
• Duration: 15 minutes
• Session plan: This module provides knowledge on brake pad wear indicators, highlighting how they work and providing insight into how best to maintain and diagnose them. 

COATED BRAKE DISCS

• Target group: mechanics (2-8 participants)
• Duration: 15 minutes
• Session plan: This session illustrates how coated discs are able to withstand corrosion, highlights the correct installation procedure and provides details on how to ensure their longevity through following the bedding-in process.

DIRECTIONAL BRAKE PADS

• Target group: mechanics (2-8 participants)
• Duration: 15 minutes
• Session plan: This course details the characteristics of directional brake pads and how these differences to normal brake pads affect installation procedures.

ROTOR PARALELLISM

• Target group: mechanics (2-8 participants)
• Duration: 15 minutes
• Session plan: This session highlights that ‘warped rotors’ are a variation in rotor thickness and how to rectify it, the content explaining how to successfully measure defective rotors.

ABS DIAGNOSTIC CODES

• Target group: mechanics (2-8 participants)
• Duration: 15-30 minutes
• Session plan: This training relates to ABS diagnostics and how to correctly interpret any fault codes. It explains the functions and principles of the ABS system, providing the knowledge and skills to successfully diagnose any issues.

BEDDING-IN BRAKES

• Target group: mechanics (2-8 participants)
• Duration: 15 minutes
• Session plan: This training module covers the concept of bedding-in brakes. It underlines why the procedure is required, explains the effect of friction between components and the consequences of not correctly following the process. 

BRAKES FOR COMMERCIAL VEHICLE RANGE

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session provides a technical overview of Tenneco braking products for Commercial Vehicle applications. Content includes an insight into friction material, plus advice on installation and fault-finding. 

VERIFY BRAKE ROTOR THICKNESS

• Target group: mechanics (2-8 participants)
• Duration: 15 minutes
• Session plan: The impact of worn brake discs on braking efficiency and safety are explained in this session, with information provided on the minimum recommended thickness of discs and how to measure them using a micrometer gauge.

Please, ask our On-The-Go team for a customized emissions control training

ENGINE SEALING

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session provides an overview of Payen sealing components, detailing their function, technological features, the correct installation process and troubleshooting.

INTRODUCTION TO PETROL ENGINE DIAGNOSIS

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session studies Glyco engine bearings, providing an overview of their function and technologies. It also includes advice on their installation and troubleshooting.

PTFE SEALS

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session focuses on PTFE seals, providing an understanding of their features and benefits, plus advice on correct fitting procedures. 

BEARINGS

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session provides overview of function, technical & technological features of Glyco engine bearings including recommendations on their installation and troubleshooting.

CAMSHAFTS AND LIFTERS

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session provides an overview of the function and technical features of AE camshafts and hydraulic lifters. It also includes recommendations on their installation and troubleshooting. 

PISTONS

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session provides an overview of the function and technical features of Nural pistons and cylinder kits. It also includes recommendations on their installation and troubleshooting.

CYLINDERS LINERS

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session looks at Goetze cylinder liners, providing an overview of what they do, their technical features and advice on installation and troubleshooting.

PISTON RINGS

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session provides an overview of Goetze piston rings, detailing their function, technical features, the correct installation process and troubleshooting tips.

VALVES AND GUIDES

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session focuses on AE valves and guides, providing an overview of their function, technical features, how to install them correctly and troubleshooting. 

DIESEL FILTER WATER SEPARATOR

• Target group: technicians (2-8 participants)
• Duration: 15 minutes
• Session plan: This module explains the diesel water separator, providing an insight into its design, function and installation. 

OIL FILTER BYPASS

• Target group: mechanics (2-8 participants)
• Duration: 15 minutes
• Session plan: This session explains the oil filter and the design and function of its bypass valve.

OIL FILTERS: REMOVAL TOOLS - WHAT TO USE

• Target group: mechanics (2-8 participants)
• Duration: 15 minutes
• Session plan: This session provides an overview of oil filter removal tools and how to use them, plus oil filter installation tips.

SPARK PLUG FITTING

• Target group: mechanics (2-8 participants)
• Duration: 15-30 minutes
• Session plan: This session provides an overview of the different types of spark plug, the consequences that over/under tightening can have on engine performance, plus installation tips.

CHAMPION EASYVISION WIPER BLADES FITTING TIPS AND TRICKS

• Target group: mechanics (2-8 participants)
• Duration: 30 minutes
• Session plan: This training session provides information on different types of Champion Easyvision wiper blade connectors, together with fitting tips and tricks 
• Notes: This product category is only applicable for RSA and Sub-Saharan Africa region

MAIN SHOCKS ABSORBER TECHNOLOGIES AND MONROE RANGE

• Target group: technicians (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session provides an overview of the main shock absorber technologies, with a focus on the extensive Monroe range and the benefits its advanced products provide.

MONROE COMMERCIAL VEHICLE RANGE AND TECHNOLOGIES

• Target group: technicians (2-8 participants)
• Duration: 60-90 minutes
• Session plan: Monroe CV range key features and benefits, technologies, installation and troubleshooting tips are all covered during this session. 

SHOCK ABSORBERS DIAGNOSIS AND INSTALLATION

• Target group: technicians (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session covers shock absorber installation and diagnosis, together with typical claims and the reasons behind them. 

SHOCK ABSORBER, MK & PK: impact on safety, service life and comfort

• Target group: technicians (2-8 participants)
• Duration: 30-60 minutes
• Session plan: This session explains  the impact that worn shock absorbers have on safety, service life and comfort. Advice on replacement intervals, plus mounting and protection kits (MK & PK), is also included.

SPRING DIAGNOSIS AND INSTALLATION

• Target group: technicians (2-8 participants)
• Duration: 30 minutes
• Session plan: This session covers the installation and diagnosis of suspension springs, as well as typical claims and the reasons behind them. 

SPRING TECHNOLOGIES AND MONROE RANGE

• Target group: technicians (2-8 participants)
• Duration: 30 minutes
• Session plan: This session provides an overview of the Monroe suspension spring range and its technologies. 

DIAGNOSIS OF WORN WHEEL END BEARINGS

• Target group: technicians (2-8 participants)
• Duration: 30 minutes
• Session plan: This session explains the function of the wheel end bearing, how it is constructed, common signs of wear, and how to diagnose when it is due for replacement.

STABILISER SYSTEM

• Target group: technicians (2-8 participants)
• Duration: 15-30 minutes
• Session plan: This training session offers an explanation of the stabiliser bar system, including how it works, what it does and its impact on steering characteristics.

TYRES AND WHEELS DIAGNOSIS

• Target group: mechanics (2-8 participants)
• Duration: 15-30 minutes
• Session plan: This session starts with a statement on tyre wear patterns. This statement is used to get the attention  of the participants and test their pre-knowledge. After this, normal and abnormal tyre wear is discussed. Tyre wear is related to tyre pressure, misuse and incorrect wheel positions. If time allows for a 30-minute session tyre rotation strategy and out of balance tyres are discussed.

TYRES AND WHEELS DIAGNOSIS

• Target group: mechanics (2-8 participants)
• Duration: 15-30 minutes
• Session plan: This session discusses normal and abnormal tyre wear, underlining how it is related to tyre pressure, misuse and incorrect wheel alignment. It also shows how tyre wear patterns are essential in understanding if a tyre is wearing correctly.

WHEEL AND BEARING WITH ABS FUNCTIONALITY

• Target group: mechanics (2-8 participants)
• Duration: 15 minutes
• Session plan: This session focuses on wheel speed sensors and the impulse wheel. It highlights how selected wheel end bearing generations combined with ABS sensors function, with further information provided on using the wheel end bearing magnetic field tester and how to avoid damage to the magnetic encoder in the wheel end bearing during maintenance. 

BALL JOINT FITTING

• Target group: mechanics (2-8 participants)
• Duration: 30 minutes
• Session plan: This training module provides information on how the ball joint functions, its application, how to pinpoint wear, and different types of installation procedures. 

DIAGNOSING STEERING AND SUSPENSION SYSTEMS

• Target group: mechanics (2-8 participants)
• Duration: 60-90 minutes
• Session plan: This session provides an overview of the different components of steering and suspension systems, their function, troubleshooting faults, plus tips on maintenance and installation procedures.

MOOG DIFFERENTIATION RANGE: KEY FEATURES AND BENEFITS

• Target group: mechanics (2-8 participants)
• Duration: 30-60 minutes
• Session plan: Session participants will be provided with an insight into the MOOG new differentiated parts range. The course content highlights key features, technologies and benefits, and how they compare to other products.

STEERING ANGLE SENSOR

• Target group: mechanics (2-8 participants)
• Duration: 30 minutes
• Session plan: This course covers all aspects of the steering angle sensor, including its function and how it interacts with other vehicle systems. The importance and correct procedure of the calibration process is also explained.
  
  SUSPENSION BUSH FITTING

• Target group: mechanics (2-8 participants)
• Duration: 15-30 minutes
• Session plan: Suspension bush function and different types will be explained during this training session. The results of bush wear, installation procedures and troubleshooting techniques are also covered.

The content of this training session is customized to the customer's requirements.